Nibe ERS 10-400 / 10-500 / S10-400 / S10-500 filter set G4+F7 (house brand)
Nibe ERS 10-400 / 10-500 / S10-400 / S10-500 filter set G4+F7 (house brand)
Filter protection level indicates efficiency in blocking particles or contaminants, varying by standard and application.
General dust and particle filtration
Captures pollen, mold spores, and other allergens
Protects against allergens and urban pollution
Key features of this product
Certified quality to international ISO standards
Manufactured entirely within the European Union
Effective filtration for up to 6 months.
Price for set
Model compatibility
Compatible with:
- Nibe ERS 10-400
- Nibe ERS 10-500
- Nibe ERS S10-400
- Nibe ERS S10-500
- Nibe GV-HR 120-400
- Nibe GV-HR 120-500
Regional names include ALTO SMART ERS (S)10-400 and ALTO BASIC 120-400. The ERS S10-400/ENT enthalpy version uses the same filters.
The set contains one G4 extract-air filter and one F7 supply-air filter of the same size. Check the size and reference of the installed filters before ordering. The ERS 20-250 / 20-300 and GV-HR 130-150 / 130-250 use a different filter size and are not covered by this set.
What the filter set protects against
Filters are listed in extract → supply order:
- G4 extract-air filter: ISO Coarse 65%, captures coarse dust, lint and other larger particles in the air leaving the rooms, helping to protect the ventilation unit and its heat exchanger
- F7 supply-air filter: ISO ePM1 65%, reduces pollen, mould spores and fine particulate pollution in the incoming outdoor air
G4 and F7 are former EN 779 classes. Both filters use pleated Z-line media. Fit the G4 filter on the extract side and the F7 filter on the supply side. These particulate filters do not remove gases or odours.
Use and maintenance
Switch off the ventilation unit before opening the filter compartment. Remove the filter cassette or holders as described in the unit manual. Replace both filters, follow the airflow arrows and check that the filters sit securely around the perimeter without gaps. Reset the filter reminder on the controller where required.
Inspect the filters regularly and replace them approximately every 3–6 months, sooner if they are heavily loaded or the controller indicates it. Outdoor pollution, nearby building work and seasonal pollen shorten their service life. Do not wash these disposable filters.
Manufacturing quality
Our house-brand filters are manufactured in the EU by AORA, a reputable and well-known filter manufacturer. The set contains two Z-line panel filters with synthetic frames and different media classes: G4 for extract air and F7 for supply air. The pleated construction increases the filtering surface within the filter depth. It is a compatible replacement for the original filters listed below and contains both filters for a complete extract-and-supply change.
Original product codes
G4 extract-air filter references:
- Nibe 060893
- Nibe 036893 (published in Nibe's Czech ERS S10-400 documentation)
- Nibe 069222 / G069222
- NIBE-BIAWAR 29086 (Polish market)
- LVI 7923516 (Finnish identifier of the original Nibe G4 filter)
F7 supply-air filter references:
- Nibe 060894
- Nibe 036894 (published in Nibe's Czech ERS S10-400 documentation)
- Nibe 069224 / G069224
- NIBE-BIAWAR 29087 (Polish market)
- LVI 7923517 (Finnish identifier of the original Nibe F7 filter)
These are references of the original individual filters, given for compatibility. They are not barcodes or part numbers of this AORA set. AORA set MPN: AORS0000185.
| Filter Type / EN 779 Class | ISO 16890 Class | Efficiency (%): Coarse (>10 µm) | PM10 (≤10 µm) | PM2.5 (≤2.5 µm) | PM1 (≤1 µm) | Gas/VOC Removal | Real-Life Particle & Pollutant Examples |
|---|---|---|---|---|---|---|---|
| G1 | ISO Coarse | ~40% | <10% | ~0% | ~0% | Sand, textile fibers, carpet fluff, plant debris, insect wings, visible lint | |
| G2 | ISO Coarse | ~50% | <15% | ~0% | ~0% | Sawdust, hair, coarse textile particles, large flakes of paint or rust | |
| G3 | ISO Coarse | ~60% | <25% | ~5% | ~0% | Coarse dust, lint, animal hair, some pollen | |
| G4 | ISO Coarse | 65-75% | 25-35% | 10-15% | <5% | Large pollen grains, soil particles, textile lint | |
| M5 | ISO ePM10 ≥50% | ~80% | 50–65% | 20–30% | 10–15% | Pollen, mold spores, pet dander, house dust | |
| M6 | ISO ePM10 (60–80%) | ~90% | 65–80% | 30–45% | 15–25% | Building/construction dust, concrete dust, ash particles, fine cement dust | |
| F7 | ISO ePM2.5 (50–65%) | >90% | 75–90% | 50–65% | 30–45% | Bacteria, smog, tobacco smoke particles, combustion dust, spores, wildfire smoke particles | |
| F8 | ISO ePM2.5 (65–80%) | >95% | 85–95% | 65–80% | 45–60% | Fungal spores, air pollution aerosols | |
| F9 | ISO ePM1 (80–95%) | >95% | >95% | >90% | 80-95% | Diesel soot, airborne viruses, smoke from traffic and industry, combustion particles, ultra-fine dust, secondary organic aerosols from chemical reactions in air | |
| Activated Carbon | Not classified (gas filter) | Varies (combined with prefilter) | Varies | Varies | Varies |
High Efficiency |
Volatile Organic Compounds (VOCs), formaldehyde, ozone, nitrogen dioxide (NO₂), sulfur dioxide (SO₂), benzene, toluene, cooking odors, cigarette smoke odors, pet smells, perfumes |
Shipping and delivery
We process your order as quickly as possible. Dispatch time depends on the availability of your filters.
When is your order dispatched?
- In stock: dispatched within 24–48 hours.
- Not in stock: dispatched within 5–15 business days.
If a product page states a different dispatch time, that time applies.
Delivery times with DPD
After dispatch, DPD delivers your parcel to your door or to a DPD Pickup point of your choice:
| Country | Delivery time |
|---|---|
| Belgium | 2–4 business days |
| Netherlands | 2–4 business days |
| France | 2–4 business days |
| Luxembourg | 2–4 business days |
Delivery time starts once your order has been dispatched and comes on top of the dispatch time.
Shipping costs
Free shipping on orders from €100. For smaller orders, shipping costs are shown at checkout based on your delivery address.
Track your order
Once your order has been dispatched, you receive a shipping confirmation with tracking details, so you can follow your parcel easily.
Easy returns within 30 days
You can return your order within 30 days of receipt for a full refund, provided the products meet our return conditions.
Unpacked products are also accepted, as long as they are unused, undamaged and in good condition. Damaged, dirty or unusable products cannot be returned.
Want to return something after 30 days? Contact us. We review each request individually and are happy to help.
How to return a product
Please contact us before returning anything. We will send you the return instructions and guide you through the rest of the process.
Filter Direct pays the return shipping costs.
Received a wrong or damaged product?
Received a wrong or defective product? Contact us as soon as possible and we will help you resolve it.
Refunds
Once we receive your return, we check the condition of the products within 5 business days.
Once the return is approved, we process the refund within 5 business days to your original payment method.
Cancelling an order
You can cancel your order as long as it has not been dispatched. Refunds for cancelled orders are processed within 5 business days.
Business days
Dispatch and delivery times are calculated in business days, Monday to Friday, excluding public holidays.



Average rating
0.0
Only logged in customers who have purchased this product may leave a review
Customer Feedback
There are no reviews yet.